Axicon the barcode experts


Axicon In-Line Barcode Verifier

Using models 6525-S & 7025-S



Specifically designed for use with thermal printers, the Axicon in-line barcode verification system uses the 6525-S or 7025-S verifier to provide full ISO/IEC-compliant results.  These verifiers scan 150 times per second, and the results can be analysed at 100 or more scans per second, depending on the PC.  It is possible to see the reports on the quality of each barcode instantly, and the operator can be alerted to any deterioration in print quality.  Common problems with thermal printers, such as damaged or dirty printheads, media movement, and ribbon creasing, and any quiet zone infringements can be detected immediately, and checks on data content and format can also be carried out.


The Axicon 6525-S is designed to verify linear barcodes with a maximum width, including quiet zones, of 125 mm.  This means it can be used to check all GS1 symbols used at the retail point-of-sale (EAN-13, EAN-8, UPC-A and UPC-E, GS1 Databar), those used on outer cases (EAN-13, ITF-14, and GS1-128), and on logistics labels (GS1-128).


The Axicon 7025-S barcode verifier is designed to verify large linear barcodes with a maximum width, including quiet zones, of 195 mm.  This means it can be used to check all barcodes used in general distribution, whether they appear on outer cases or on pallet labels (EAN-13, UPC-A, ITF-14 and GS1-128).


The reporting tools enable you to save the verification file of every barcode, or just those that fail, can provide you with a spreadsheet of the results, and a summary of every print run.  The software allows for fully auditable traceability records, which then form an integral part of any ISO 9001 quality management system.




Axicon 6525-S - Aperture automatically switchable between aperture reference numbers 05, 06, 10 and 20.  Scan width 125 mm. Wavelength of light is 660 nm.

Axicon 7025-S - Aperture automatically switchable between aperture reference numbers 08, 10 and 20.  Scan width 195 mm. Wavelength of light is 660 nm.

Printer interaction: Capable of pausing certain Zebra, Sato and TEC printer models with optional pause interface.

Mounting: A range of mounting options is available. Scan rate: 150 scans/second. Analysis rate: 100 per seconds or more dependent on PC.




USB2 connection to PC.


System Requirements


PC running any currently supported version of Microsoft Windows.


The verification system is supplied as the read-head (hardware), a CD with the Axicon verifier software (in several languages), a data cable, a quick start guide, a calibration card, and compliance certificates in a protective carry case.


Software Installation


To install the In-line software you will need to download the Axicon PC verifier for linear barcodes from our downloads page. Follow the on-screen instructions until you see the ‘select components to install’ screen (see right).  You will then need to tick the ‘online verifier’ box and press next. Follow the on screen instructions to finish installation and this will install the linear and In-line verifier software.

In-Line barcode verifier

Axicon In-Line Verifier Product specification

Axicon In-Line verifier user guide

See Also

Axicon 6025-S

Barcode Verifier

Axicon 6525-S

Barcode Verifier

Axicon 7025-S

Barcode Verifier

Why Choose Axicon Verifiers?

© Axicon Auto ID 2001-2018